A custom keycap sample at ArtKeyCaps usually moves from brief to free 3D mockup to a physical pre-production piece in about 5–7 days. You approve the mockup first, we build the fidget clicker prototype or keycap sample, you check feel, colour and logo, then production starts only after written approval. The sample courier is paid by the buyer; custom and logo pieces are non-returnable unless defective.
Brand product managers and sourcing leads often ask the same question before they lock a launch date: what exactly happens between "please send a sample" and "we approve production"? This guide walks through that sampling path for custom keycap clickers, 3D-printed shapes, resin artisan keycaps and PBT dye-sub caps. ArtKeyCaps is a Ningbo factory founded in 2009, with 1,000 3D printers (mainly Bambu Lab) and daily capacity of 2,000+ printed clickers, 1,000+ resin artisan keycaps and 40,000+ PBT dye-sub keycaps.
What counts as a custom keycap sample?
A sample is a physical piece built to the same construction you intend to buy, so you can judge switch feel, colour, print or sculpt detail, keychain hardware and packing. It is not a marketing render. For most projects the path starts with a free 3D mockup within 24 hours, then a physical sample in about 5–7 days. For novelty-shape clickers, plan 7–10 days. For a steel-mold injection project, tooling and sampling take about 30 days, roughly 40 days in total depending on the design.
Browse formats first in the ArtKeyCaps online catalog, the keycap clicker catalog and the 3D keycap catalog, then request a sample against a ready design or a custom brief.
Which sample path fits your product?
Different products share the same approval idea but not the same timing or minimums. Use this table to set expectations before you write the RFQ.
| Product | Sample path | Typical sample timing | Production MOQ after approval |
|---|---|---|---|
| Ready catalog clicker (your colours / logo) | Pick a design, confirm colours and logo, receive physical sample | About 5–7 days | From 100 pcs on many catalog styles |
| Custom 3D-printed clicker shape | Free 3D mockup, then printed prototype with switch and keychain | Mockup in 24 hours; sample about 5–7 days (novelty 7–10) | 200 pcs per design |
| Custom resin 3D artisan keycap | Sculpt mockup, then painted or finished sample | About 5–7 days after sculpt approval | 500 pcs |
| PBT dye-sub keycaps | Legend / colour proof, then printed sample caps | Confirmed with the quote (often within the sample window) | 500 pcs |
| Full keycap set OEM | Profile, colour and legend proof, then sample set pieces | Confirmed per design | 200 pcs |
| Injection-molded part (steel mold) | Tooling + first-off samples | About 30 days tooling and sampling, ~40 days total | Quoted separately |
3D printing replaces injection molding for most custom clicker shapes, so no mold is needed on that route. Injection-molded projects are quoted separately. If you are still choosing between a ready design and tooling, read ready designs vs custom molds first, then come back to sampling.
What should you send to request a sample?
Clear inputs cut a full revision cycle. Send as much of this as you have:
- Reference. A ready design name from the catalog, a sketch, photo, 2D mascot or existing 3D file.
- Logo and artwork. Vector logo (AI/SVG/PDF) plus Pantone or HEX targets if colour must match a brand guide.
- Format. 1-key, 2-key, 4-key bar, 2×2, 3×3, novelty shape, resin artisan keycap or PBT set — see the custom clickers OEM page and 3D artisan keycaps page.
- Switch feel. Blue clicky is the standard; silent options are available on request.
- Quantity and in-hands date. First production quantity and the date the goods must arrive, so we can back-schedule after sample approval.
- Packaging intent. Polybag, blister, blind bag or display box — packaging can have its own minimums.
If you only need colour and logo on a proven shape, start from a ready design. If the shape itself must be yours, we treat it as a custom printed or sculpted sample. Our OEM factory vetting guide lists the same files buyers should ask any supplier for.
How does the 5–7 day sample process work, step by step?
- Submit the brief. Use the inquiry form or email sales@artkeycaps.com with the files above. Name your target product and whether you want a ready design or a custom shape.
- Receive the free 3D mockup. For custom shapes we reply within 24 hours with a 3D mockup and a route recommendation (printed clicker, resin keycap, dye-sub or injection). Ready designs skip new sculpting and move straight to colour and logo confirmation.
- Approve or revise the mockup. Check proportions, logo placement, key count and colour callouts. One clean revision at this stage is faster than reprinting a physical piece later.
- We build the physical sample. Printing, dye-sub, resin finish or assembly happens on the same lines that run bulk. Printed clickers come from a farm of 1,000 printers; keycap samples use the dye-sub or resin cells described on the factory capacity page.
- Internal check before dispatch. We check switch action, keycap fit, logo legibility and hardware. Defective builds are remade before the sample leaves Ningbo.
- Sample ships to you. The sample courier is paid by the buyer. Choose the service that matches your review meeting date.
- You approve in writing. Confirm feel, colour, logo, dimensions and packing notes by email. List any change as a new revision, not as a silent assumption on the production run.
- Production starts after approval. A 50% deposit starts the bulk order; we send an inspection video before the balance. Custom, logo and OEM goods are non-returnable unless defective.
That sequence is the same whether you are sampling a desk toy for a product launch or a mascot keycap for merch. For printed-shape economics and pack sizes, see 3D-printed fidget clickers wholesale; for how quantity affects the quote after approval, see fidget clicker MOQ.
What should you check when the sample arrives?
Open the sample against a short checklist so approval is objective:
- Feel. Travel, click or silent behaviour, and whether the base sits stably in hand or on a desk.
- Colour. Compare to your Pantone or HEX under daylight and office light. Printed plastics and dye-sub PBT read differently; ask for a second colour chip sample if the gap matters.
- Logo and legends. Size, placement, edge sharpness and readability at arm's length.
- Shape fidelity. For mascots and product replicas, check silhouette and thickness against the approved mockup.
- Hardware. Keychain ring, clasp and any acrylic tag — strength and finish.
- Finish honesty. 3D-printed parts can show fine layer lines up close; that is expected on the printed route. If you need a perfectly smooth molded surface, ask us to quote the injection path separately.
Write "approved as sampled" or "approved with these changes" in one email. Ambiguous approvals are the main cause of production surprises.
How do keycap samples differ from clicker prototypes?
Clicker samples are full assemblies: base, switch, keycaps and usually a keychain. A custom keycap sample for a keyboard brand may be blanks, dye-sub legends or a small set of profile caps only. Resin artisan samples focus on sculpt and paint. PBT dye-sub samples focus on legend sharpness and colour on thick PBT. You can review existing set styles in the keycap set catalog and resin styles in the 3D keycap catalog before you ask for a bespoke sample.
If your program needs both a clicker giveaway and a matching keycap set, say so in the first brief. We can align colour targets across both sample paths so merch and keyboards land as one family.
FAQ: custom keycap samples and pre-production approval
How long does a custom keycap sample take?
A physical sample usually takes about 5–7 days after you approve the free 3D mockup. Novelty-shape clickers can take 7–10 days. Steel-mold tooling and sampling need about 30 days, roughly 40 days in total depending on the design. Bulk production lead time is confirmed per order.
Is the 3D mockup free, and how fast is it?
Yes. For custom shapes we prepare a free 3D mockup, typically within 24 hours of receiving clear artwork or a reference. You approve the mockup before we print or assemble a physical sample.
Who pays for the sample courier?
The sample courier is paid by the buyer. We pack the approved sample and ship it by the courier you choose; freight is on your side.
What is the MOQ after I approve a sample?
Custom clickers start at 200 pcs. Custom 3D keycaps start at 500 pcs. Full keycap set OEM starts at 200 pcs. PBT dye-sub keycaps start at 500 pcs. Ready catalog designs can start from lower pack sizes — see the online catalog for each style.
Are custom samples and logo orders returnable?
Custom, logo and OEM items are made to order and cannot be returned unless defective. Standard unused catalog items follow a 14-day return window. That is why we ask you to approve a physical sample before production.
Do I need a mold to get a sample?
Usually not. For 3D-printed clickers and shapes, 3D printing replaces injection molding, so no mold is needed. Injection-molded projects use steel tooling and are quoted separately, including their sample path.
Request a sample
Send your ready design name or artwork, quantity, logo and in-hands date. We reply with a free 3D mockup for custom shapes (usually within 24 hours), a sample plan and the production MOQ that applies after approval.
- Inquiry form: artkeycaps.com/pages/custom-clickers-oem
- Email: sales@artkeycaps.com
- Browse first: online catalog · keycap clickers · 3D keycaps
Related reading: Ready designs vs custom molds · 3D-printed fidget clickers wholesale · Custom artisan keycaps in bulk · How to vet a fidget clicker manufacturer
0 comments